Context Navigation

← Previous Ticket
Next Ticket →

#863 closed defect (fixed)

mplayer doesn't play by DVB FF card any video files

Reported by:	goga777@…	Owned by:	beastd
Priority:	important	Component:	vo
Version:	unspecified	Severity:	normal
Keywords:		Cc:	r_togni@…
Blocked By:		Blocking:
Reproduced by developer:	no	Analyzed by developer:	no

Description

I very offten (9 time from 10) can't play by svn-mplayer with FF card Technotrend Premium 2300 any video files. For example, If I will try to play 10 times the same file, only one time I will see picture and sound, but 9 times - nothing.

Hereafter there's log from successful test

arvdr:~# /usr/bin/mplayer_svn -vo mpegpes -ao mpegpes -nolirc -msglevel all=9 /data/mplayer/Polina_New_Year.mpeg
MPlayer dev-SVN-r23741-4.1.2 (C) 2000-2007 MPlayer Team
CPU: AMD Sempron(tm) Processor 2800+ (Family: 15, Model: 44, Stepping: 2)
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Adding file /data/mplayer/Polina_New_Year.mpeg
Config pushed level is now 2
Config pushed level is now 3
get_path('codecs.conf') -> '/root/.mplayer/codecs.conf'
Reading /root/.mplayer/codecs.conf: Can't open '/root/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/etc/mplayer/codecs.conf: Can't open '/usr/local/etc/mplayer/codecs.conf': No such file or directory
Using built-in default codecs.conf.
Configuration: --enable-runtime-cpudetection --enable-largefiles --enable-menu --enable-dvb
CommandLine: '-vo' 'mpegpes' '-ao' 'mpegpes' '-nolirc' '-msglevel' 'all=9' '/data/mplayer/Polina_New_Year.mpeg'
init_freetype
get_path('font/font.desc') -> '/root/.mplayer/font/font.desc'
font: can't open file: /root/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
get_path('fonts') -> '/root/.mplayer/fonts'
Using nanosleep() timing
get_path('input.conf') -> '/root/.mplayer/input.conf'
Can't open input config file /root/.mplayer/input.conf: No such file or directory
Can't open input config file /usr/local/etc/mplayer/input.conf: No such file or directory
Falling back on default (hardcoded) input config
get_path('Polina_New_Year.mpeg.conf') -> '/root/.mplayer/Polina_New_Year.mpeg.conf'

[init getch2]

Playing /data/mplayer/Polina_New_Year.mpeg.
get_path('sub/') -> '/root/.mplayer/sub/'
[file] File size is 2232918016 bytes
STREAM: [file] /data/mplayer/Polina_New_Year.mpeg
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
s->pos=0 newpos=0 new_bufpos=0 buflen=0
DEMUXER: freeing demuxer at 0x8b290c0
Checking for YUV4MPEG2
DEMUXER: freeing demuxer at 0x8b290c0
ASF_check: not ASF guid!
DEMUXER: freeing demuxer at 0x8b290c0
Checking for NuppelVideo
DEMUXER: freeing demuxer at 0x8b290c0
Checking for REAL
DEMUXER: freeing demuxer at 0x8b290c0
Checking for SMJPEG
DEMUXER: freeing demuxer at 0x8b290c0
[mkv] no head found
DEMUXER: freeing demuxer at 0x8b290c0
DEMUXER: freeing demuxer at 0x8b290c0
DEMUXER: freeing demuxer at 0x8b290c0
Ogg demuxer : Bad page sync
DEMUXER: freeing demuxer at 0x8b290c0
Searching demuxer type for filename /data/mplayer/Polina_New_Year.mpeg ext: .mpeg
s->pos=1000 newpos=0 new_bufpos=0 buflen=0
LAVF_check: MPEG PS format
DEMUXER: freeing demuxer at 0x8b290c0
Checking for Nullsoft Streaming Video
DEMUXER: freeing demuxer at 0x8b290c0
s->pos=3E800 newpos=0 new_bufpos=0 buflen=0
Checking for MOV
DEMUXER: freeing demuxer at 0x8b290c0
Checking for VIVO
header block 1 size: 0
DEMUXER: freeing demuxer at 0x8b290c0
DEMUXER: freeing demuxer at 0x8b290c0
DEMUXER: freeing demuxer at 0x8b290c0
DEMUXER: freeing demuxer at 0x8b290c0
DEMUXER: freeing demuxer at 0x8b290c0
AVS: avs_check_file - attempting to open file /data/mplayer/Polina_New_Year.mpeg
AVS: File is too big, aborting...
DEMUXER: freeing demuxer at 0x8b290c0
Checking for PVA
Failed: PVA
DEMUXER: freeing demuxer at 0x8b290c0
Checking for MPEG-TS...
GET_PACKET_SIZE, pos 1, char: be
GET_PACKET_SIZE, pos 1, char: be
GET_PACKET_SIZE, pos 1, char: 1d
GET_PACKET_SIZE, pos 1, char: 1d
GET_PACKET_SIZE, pos 1, char: c
GET_PACKET_SIZE, pos 1, char: c
GET_PACKET_SIZE, pos 1, char: 64
GET_PACKET_SIZE, pos 1, char: 64
GET_PACKET_SIZE, pos 1, char: f6
GET_PACKET_SIZE, pos 1, char: f6
GET_PACKET_SIZE, pos 1, char: 0
GET_PACKET_SIZE, pos 1, char: 0
GET_PACKET_SIZE, pos 1, char: af
GET_PACKET_SIZE, pos 1, char: af
GET_PACKET_SIZE, pos 1, char: fb
GET_PACKET_SIZE, pos 1, char: fb
GET_PACKET_SIZE, pos 1, char: 41
GET_PACKET_SIZE, pos 1, char: 41
GET_PACKET_SIZE, pos 1, char: 6a
GET_PACKET_SIZE, pos 1, char: 6a
GET_PACKET_SIZE, pos 1, char: a0
GET_PACKET_SIZE, pos 1, char: a0
TRIED UP TO POSITION 69819, FOUND 47, packet_size= 0, SEEMS A TS? 0
s->pos=13000 newpos=11000 new_bufpos=110BB buflen=0
DEMUXER: freeing demuxer at 0x8b290c0
s->pos=11800 newpos=0 new_bufpos=0 buflen=0
Checking for LMLM4 Stream Format
typ: 442 chan: 0 size: 1156372351 pad: 121
Invalid packet in LMLM4 stream: ch=0 size=1156372351
LMLM4 Stream Format not found
DEMUXER: freeing demuxer at 0x8b290c0
system stream synced at 0xD (13)!
==> Found video stream: 0
s->pos=1000 newpos=0 new_bufpos=0 buflen=0
==> Found audio stream: 0
s->pos=21000 newpos=428BD000 new_bufpos=428BD000 buflen=0
s->pos=428CF000 newpos=850FF800 new_bufpos=850FFEE0 buflen=0
s->pos=8511B000 newpos=1000 new_bufpos=1000 buflen=0
s->pos=1800 newpos=0 new_bufpos=0 buflen=0
MPEG-PS file format detected.
Searching for sequence header... OK!
VIDEO: MPEG2 720x576 (aspect 2) 25.000 fps 9600.0 kbps (1200.0 kbyte/s)
[V] filefmt:2 fourcc:0x10000002 size:720x576 fps:25.00 ftime:=0.0400
get_path('sub/') -> '/root/.mplayer/sub/'
Opening /dev/dvb/adapter0/video0+audio0
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 720 x 576 (preferred colorspace: Mpeg PES)
Trying filter chain: vo
vo_debug: query(Mpeg PES) returned 0x103 (i=0)
VDec: using Mpeg PES as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO Config (720x576->720x576,flags=0,'MPlayer',0x4D504553)
VO: [mpegpes] 720x576 => 720x576 Mpeg PES
VO: Description: Mpeg-PES to DVB card
VO: Author: A'rpi
Selected video codec: [mpegpes] vfm: mpegpes (MPEG-PES output (.mpg or DXR3/IVTV/DVB card))
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
mp3lib: using 3DNow!Ex optimized decore!
MP3lib: init layer2&3 finished, tables done
MPEG 1.0, Layer II, 48000 Hz 384 kbit Stereo, BPF: 1152
Channels: 2, copyright: No, original: No, CRC: No, emphasis: 0
AUDIO: 48000 Hz, 2 ch, s16le, 384.0 kbit/25.00% (ratio: 48000->192000)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Building audio filter chain for 48000Hz/2ch/s16le -> 0Hz/0ch/??...
[libaf] Adding filter dummy
[dummy] Was reinitialized: 48000Hz/2ch/s16le
[dummy] Was reinitialized: 48000Hz/2ch/s16le
Opening /dev/dvb/adapter0/audio0
AO: [mpegpes] 48000Hz 2ch s16le (2 bytes per sample)
AO: Description: DVB audio output
AO: Author: A'rpi
Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le...
[dummy] Was reinitialized: 48000Hz/2ch/s16le
[dummy] Was reinitialized: 48000Hz/2ch/s16le
Starting playback...

telecine = 1.0 -2.500

VDec: vo config request - 720 x 576 (preferred colorspace: Mpeg PES)
Trying filter chain: vo
vo_debug: query(Mpeg PES) returned 0x103 (i=0)
VDec: using Mpeg PES as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO Config (720x576->768x576,flags=0,'MPlayer',0x4D504553)
VO: [mpegpes] 720x576 => 768x576 Mpeg PES
VO: Description: Mpeg-PES to DVB card
VO: Author: A'rpi
* [vo] Exporting mp_image_t, 720x576x0bpp RGB packed, 0 bytes
(imgfmt: 4d504553, planes: (nil),(nil),(nil) strides: 0,0,0, chroma: 0x0, shift: h:0,v:0)
MPEG1 PES packet: 0x1e0 => 0

telecine = 1.0 -2.500 0 ct: 0.000 1/ 1 ??% ??% ??,?% 0 0

MPEG1 PES packet: 0x1e0 => 3599

telecine = 1.0 -2.500 0 ct: 0.004 2/ 2 ??% ??% ??,?% 0 0

MPEG1 PES packet: 0x1e0 => 7199
A: 0.3 V: 0.1 A-V: 0.200 ct: 0.004 3/ 3 ??% ??% ??,?% 0 0
decaudio: minlen=6000 maxlen=65536 declen=6000 (max=70144)
decaudio: decoding 1392 bytes, max: 65536 (4608)
decaudio: declen=6000 out=6000 (max 65536)
MPEG2 PES packet: 0xbd => 359
A: 0.4 V: 0.1 A-V: 0.237 ct: 0.008 3/ 3 ??% ??% ??,?% 0 0
decaudio: minlen=6000 maxlen=65536 declen=6000 (max=70144)
decaudio: decoding 2784 bytes, max: 66928 (4608)
decaudio: declen=6000 out=6000 (max 65536)
MPEG2 PES packet: 0xbd => 3532

telecine = 1.0 -2.500

MPEG1 PES packet: 0x1e0 => 10799

telecine = 1.0 -2.500 8 ct: 0.012 4/ 4 ??% ??% ??,?% 0 0

MPEG1 PES packet: 0x1e0 => 14399
A: 0.4 V: 0.4 A-V: 0.028 ct: 0.012 5/ 5 ??% ??% ??,?% 0 0
decaudio: minlen=8000 maxlen=65536 declen=8000 (max=70144)
decaudio: decoding 6176 bytes, max: 68320 (4608)
decaudio: decoding 1568 bytes, max: 63712 (4608)
decaudio: declen=8000 out=8000 (max 65536)
MPEG2 PES packet: 0xbd => 6704
A: 0.4 V: 0.4 A-V: 0.076 ct: 0.016 5/ 5 ??% ??% ??,?% 0 0
decaudio: minlen=6000 maxlen=65536 declen=6000 (max=70144)
decaudio: decoding 2960 bytes, max: 67104 (4608)
decaudio: declen=6000 out=6000 (max 65536)
MPEG2 PES packet: 0xbd => 10814

telecine = 1.0 -2.500

MPEG1 PES packet: 0x1e0 => 17999

telecine = 1.0 -2.500 3 ct: 0.020 6/ 6 ??% ??% ??,?% 0 0

MPEG1 PES packet: 0x1e0 => 21599
A: 0.5 V: 0.4 A-V: 0.033 ct: 0.020 7/ 7 ??% ??% ??,?% 0 0
decaudio: minlen=8000 maxlen=65536 declen=8000 (max=70144)
decaudio: decoding 6352 bytes, max: 68496 (4608)
decaudio: decoding 1744 bytes, max: 63888 (4608)
decaudio: declen=8000 out=8000 (max 65536)
MPEG2 PES packet: 0xbd => 13987
A: 0.5 V: 0.4 A-V: 0.081 ct: 0.024 7/ 7 ??% ??% ??,?% 0 0
decaudio: minlen=6000 maxlen=65536 declen=6000 (max=70144)
decaudio: decoding 3136 bytes, max: 67280 (4608)
decaudio: declen=6000 out=6000 (max 65536)
MPEG2 PES packet: 0xbd => 18097

telecine = 1.0 -2.500

MPEG1 PES packet: 0x1e0 => 25199

telecine = 1.0 -2.500 4 ct: 0.028 8/ 8 ??% ??% ??,?% 0 0

MPEG1 PES packet: 0x1e0 => 28799
A: 0.5 V: 0.5 A-V: 0.014 ct: 0.028 9/ 9 ??% ??% ??,?% 0 0
decaudio: minlen=8000 maxlen=65536 declen=8000 (max=70144)
decaudio: decoding 6528 bytes, max: 68672 (4608)
decaudio: decoding 1920 bytes, max: 64064 (4608)
decaudio: declen=8000 out=8000 (max 65536)
MPEG2 PES packet: 0xbd => 21269
A: 0.6 V: 0.5 A-V: 0.062 ct: 0.032 9/ 9 ??% ??% ??,?% 0 0
decaudio: minlen=6000 maxlen=65536 declen=6000 (max=70144)
decaudio: decoding 3312 bytes, max: 67456 (4608)
decaudio: declen=6000 out=6000 (max 65536)
MPEG2 PES packet: 0xbd => 25379

telecine = 1.0 -2.500

MPEG1 PES packet: 0x1e0 => 32399

telecine = 1.0 -2.500 3 ct: 0.036 10/ 10 ??% ??% ??,?% 0 0

MPEG1 PES packet: 0x1e0 => 35999
A: 0.6 V: 0.6 A-V: 0.013 ct: 0.036 11/ 11 ??% ??% ??,?% 0 0
decaudio: minlen=8000 maxlen=65536 declen=8000 (max=70144)
decaudio: decoding 6704 bytes, max: 68848 (4608)
decaudio: decoding 2096 bytes, max: 64240 (4608)
decaudio: declen=8000 out=8000 (max 65536)
MPEG2 PES packet: 0xbd => 28552
A: 0.7 V: 0.6 A-V: 0.060 ct: 0.040 11/ 11 ??% ??% ??,?% 0 0
decaudio: minlen=6000 maxlen=65536 declen=6000 (max=70144)
decaudio: decoding 3488 bytes, max: 67632 (4608)
decaudio: declen=6000 out=6000 (max 65536)
MPEG2 PES packet: 0xbd => 32662

telecine = 1.0 -2.500

MPEG1 PES packet: 0x1e0 => 39599

telecine = 1.0 -2.500 8 ct: 0.044 12/ 12 ??% ??% ??,?% 0 0

MPEG1 PES packet: 0x1e0 => 43199
A: 0.7 V: 0.7 A-V: 0.018 ct: 0.044 13/ 13 ??% ??% ??,?% 0 0
decaudio: minlen=8000 maxlen=65536 declen=8000 (max=70144)
decaudio: decoding 6880 bytes, max: 69024 (4608)
decaudio: decoding 2272 bytes, max: 64416 (4608)
decaudio: declen=8000 out=8000 (max 65536)
MPEG2 PES packet: 0xbd => 35834
A: 0.7 V: 0.7 A-V: 0.041 ct: 0.048 13/ 13 ??% ??% ??,?% 0 0
decaudio: minlen=6000 maxlen=65536 declen=6000 (max=70144)
decaudio: decoding 3664 bytes, max: 67808 (4608)
decaudio: declen=6000 out=6000 (max 65536)
MPEG2 PES packet: 0xbd => 39944

telecine = 1.0 -2.500

MPEG1 PES packet: 0x1e0 => 46799

telecine = 1.0 -2.500 8 ct: 0.052 14/ 14 0% 29% 0.6% 0 0

MPEG1 PES packet: 0x1e0 => 50399
A: 0.8 V: 0.8 A-V: -0.002 ct: 0.052 15/ 15 0% 31% 0.5% 0 0
decaudio: minlen=6000 maxlen=65536 declen=6000 (max=70144)
decaudio: decoding 5056 bytes, max: 69200 (4608)
decaudio: decoding 448 bytes, max: 64592 (4608)
decaudio: declen=6000 out=6000 (max 65536)
MPEG2 PES packet: 0xbd => 43117
A: 0.8 V: 0.8 A-V: 0.035 ct: 0.056 15/ 15 0% 31% 0.6% 0 0
decaudio: minlen=8000 maxlen=65536 declen=8000 (max=70144)
decaudio: decoding 3840 bytes, max: 65984 (4608)
decaudio: declen=8000 out=8000 (max 65536)
MPEG2 PES packet: 0xbd => 46289

telecine = 1.0 -2.500

MPEG1 PES packet: 0x1e0 => 53999

telecine = 1.0 -2.500 7 ct: 0.060 16/ 16 0% 30% 0.6% 0 0

MPEG1 PES packet: 0x1e0 => 57599
A: 0.8 V: 0.8 A-V: -0.003 ct: 0.060 17/ 17 0% 30% 0.5% 0 0
decaudio: minlen=6000 maxlen=65536 declen=6000 (max=70144)
decaudio: decoding 5232 bytes, max: 69376 (4608)
decaudio: decoding 624 bytes, max: 64768 (4608)
decaudio: declen=6000 out=6000 (max 65536)
MPEG2 PES packet: 0xbd => 50399

# After I break by ctrl-C
MPlayer interrupted by signal 2 in module: play_audio

* uninit(0xECB)
Uninit audio filters...
[libaf] Removing filter dummy
Uninit audio: mp3lib
Uninit video: mpegpes
DEMUXER: freeing demuxer at 0x8b290c0
DEMUXER: freeing sh_audio at 0x8b2a0e0
DEMUXER: freeing sh_video at 0x8b29a30

[uninit getch2]
vo: x11 uninit called but X11 not inited..
max framesize was 63068 bytes

So, hereafter you can find the unsuccessful test (MPlayer will stop after 4-th cadr)

[init getch2]

telecine = 1.0 -2.500

telecine = 1.0 -2.500 0 ct: 0.000 1/ 1 ??% ??% ??,?% 0 0

MPEG1 PES packet: 0x1e0 => 3599

telecine = 1.0 -2.500 0 ct: 0.004 2/ 2 ??% ??% ??,?% 0 0

telecine = 1.0 -2.500

MPEG1 PES packet: 0x1e0 => 10799

telecine = 1.0 -2.500 8 ct: 0.012 4/ 4 ??% ??% ??,?% 0 0

MPEG1 PES packet: 0x1e0 => 14399

MPlayer interrupted by signal 2 in module: filter_video

[uninit getch2]
vo: x11 uninit called but X11 not inited..
max framesize was 37296 bytes
arvdr:~#

I don't understand, why in this case MPlayer stopping after 4-th cadr

My system is

arvdr:~# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 44
model name : AMD Sempron(tm) Processor 2800+
stepping : 2
cpu MHz : 1600.572
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 pni syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm
bogomips : 3129.34

arvdr:~# lspci -vv
00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge

Subsystem: ASUSTeK Computer Inc. A8V Deluxe
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [80] AGP version 3.0

Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [60] HyperTransport: Slave or Primary Interface

!!! Possibly incomplete decoding
Command: BaseUnitID=0 UnitCnt=3 MastHost- DefDir-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config 0: MLWI=16bit MLWO=16bit LWI=8bit LWO=8bit
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
Revision ID: 1.02

Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration

00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbd00000-fbffffff
Prefetchable memory behind bridge: e8000000-faffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2

Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)

Subsystem: Technotrend Systemtechnik GmbH Unknown device 000e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fbc00000 (32-bit, non-prefetchable) [size=512]

00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)

Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at d800 [size=8]
Region 1: I/O ports at d400 [size=4]
Region 2: I/O ports at d000 [size=8]
Region 3: I/O ports at c800 [size=4]
Region 4: I/O ports at c400 [size=16]
Region 5: I/O ports at c000 [size=256]
Capabilities: [c0] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])

Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])

Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at a800 [size=32]
Capabilities: [80] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])

Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at b000 [size=32]
Capabilities: [80] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])

Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at b400 [size=32]
Capabilities: [80] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])

Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at b800 [size=32]
Capabilities: [80] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])

Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 5
Region 0: Memory at fba00000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]

Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)

Subsystem: ASUSTeK Computer Inc. Unknown device 810d
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at a400 [size=256]
Capabilities: [c0] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)

Subsystem: ASUSTeK Computer Inc. Unknown device 80ed
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 2000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at fb900000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface

!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=8bit LWO=8bit
Revision ID: 1.02

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01) (prog-if 00 [VGA])

Subsystem: Giga-byte Technology Unknown device 4054
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at e000 [size=256]
Region 2: Memory at fbe00000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fbd00000 [disabled] [size=128K]
Capabilities: [58] AGP version 3.0

Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)

Subsystem: Giga-byte Technology Unknown device 4055
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at fbf00000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

arvdr:~# uname -r
2.6.11.12

arvdr:~# as --version
GNU assembler 2.17 Debian GNU/Linux
Copyright 2005 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License. This program has absolutely no warranty.
This assembler was configured for a target of `i486-linux-gnu'.
arvdr:~#

arvdr:~# ld -v
GNU ld version 2.17 Debian GNU/Linux
arvdr:~#

arvdr:~# gcc -v
Using built-in specs.
Target: i486-linux-gnu
Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.1 --enable-cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --with-tune=i686 --enable-checking=release i486-linux-gnu
Thread model: posix
gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)

Change History (1)

comment:1 by goga777@…, 17 years ago

Resolution:	→ fixed
Status:	new → closed

This problem was decided after firmware updating for my FF card TT2300.
Now is OK.

the detail in
http://lists.mplayerhq.hu/pipermail/mplayer-users/2007-September/069400.html

Note: See TracTickets for help on using tickets.

Download in other formats: